Plastics Challenge: Food Packaging

From Innovation, Science and Economic Development Canada

Improve the design of film food packaging to reduce the generation and disposal of plastic waste.

Sponsoring Department: Environment and Climate Change Canada (ECCC)

Funding Mechanism: Grant

Opening date: October 18, 2018
Closing date: December 12, 2018, 14:00 Eastern Standard Time

Phase 1 award recipients

Phase 2 award recipients

Challenge

Problem statement (bolded text updated on November 29, 2018)

Plastic packaging serves many useful and essential functions in the food system, such as protecting food from contamination, preserving food and facilitating transportation. Research shows that food packaging waste comprises approximately one-third of all Canadian household waste, and only 20% is recovered for reuse and recycling. Unfortunately, food waste and plastic waste are connected and both have been increasing over time. Film food packaging such as flexible pouches, wraps and bags are particularly challenging to collect, sort and recycle due to their light weight, low secondary market value and nutrient contamination.

We seek the development of sustainable packaging for both consumers and commercial applications that is functional, cost effective and energy efficient. While this challenge targets the packaging and food industry, a solution would benefit Canadian households, food processors, distributors, retailers, food services, and municipalities in Canada and around the world that face similar difficulties with food and plastic waste. Solutions must include food packaging designs that would enhance recyclability of film plastic, for example, through use of a single plastic resin type or by devising a new type of film packaging material.

Desired outcomes and considerations (bolded text updated on November 29, 2018)

Essential outcomes

The proposal must:

be informed by science, be evidence-based and considers environmental, social, and economic impacts.
describe the proposed technology and how it compares with existing film plastic alternatives and explains its benefits and drawbacks throughout the entire life-cycle (i.e. from input, production, use, and waste).

Additional outcomes

Desired outcomes include:

Improved design of film food packaging without compromising food safety and other functionalities, such as food protection during transportation;
Successfully reduce plastic film waste while contributing to the reduction of food waste;
Work in various climatic conditions and for various food products; and,
Scalable and cost effective packaging that can be easily integrated by industries within existing supply chains in Canada.

Additional consideration for selection of winners:

Impactful
Scalable
Cost Effective
No adverse environmental impacts

Background and context

This challenge will support domestic action and innovation on this issue. Federal, provincial and territorial governments are working together through the Canadian Council of Ministers of the Environment (CCME) to develop a comprehensive national zero plastic waste approach. The CCME proposes to move toward a circular economy for plastics by pursuing zero plastic waste, with a vision of keeping all types of plastic in the economy, and out of landfills and the environment. An estimated 8 million tonnes of plastic waste enters the oceans from land annually, harming wildlife, damaging habitat and introducing contaminants into the food chain. This number could double by 2025 if production and consumption rates continue on their current trajectory.

Environment and Climate Change Canada (ECCC) is committed to protecting the environment while supporting businesses and Canadians to transition towards a zero plastic waste future. This challenge is highly relevant to ECCC's mandate and the federal government's commitment to move Canada towards a zero plastic waste economy. Canada has adopted the Oceans Plastic Charter, signed at the 2018 leaders' summit in Charlevoix Quebec, by committing to pursue actions to prevent plastic pollution and marine litter across the entire life cycle of plastics. This challenge will also support Canada's international commitments to the United Nations Agenda 2030 on Sustainable Development, as well as domestic commitments under the Strategy on Short-lived Climate Pollutants (SLCP) to identify approaches to reduce avoidable food waste, increase organics diversion, and increase recycling and reuse.

Target user(s) of the solution include(s):

Consumers
Businesses (product manufacturers, distribution centers, wholesalers, retailers, and food services)
Packaging suppliers
Provincial, territorial and municipal governments
Federal government departments

Maximum value and travel

Maximum grant value

Multiple grants could result from this Challenge.

Funding of up to $150,000.00 CAD for up to 6 months could be available for any Phase 1 grant resulting from this Challenge.

Funding of up to $1,000,000.00 CAD for up to 2 years could be available for any Phase 2 grant resulting from this Challenge. Only eligible businesses that received Phase 1 funding could be considered for Phase 2.

This disclosure is made in good faith and does not commit Canada to award any grant for the total maximum funding value.

Travel

No travel is anticipated

Kick-off meeting

Teleconference/videoconference

Progress Review Meeting

Teleconference/videoconference

Final Review Meeting

Teleconference/videoconference

Eligibility

Solution proposals can only be submitted by a small business that meets all of the following criteria:

for profit
incorporated in Canada (federally or provincially)
499 or fewer full-time equivalent (FTE) employees^{Footnote *}
research and development activities that take place in Canada
50% or more of its annual wages, salaries and fees are currently paid to employees and contractors who spend the majority of their time working in Canada^{Footnote *}
50% or more of its FTE employees have Canada as their ordinary place of work^{Footnote *}
50% or more of its senior executives (Vice President and above) have Canada as their principal residence^{Footnote *}

Application guide

Evaluation Criteria

Part 1: Mandatory and Minimum Pass Mark Criteria

Proposals must meet all mandatory criteria (Questions 1a and 2) and achieve the minimum pass mark for Question 3 in order to be deemed responsive and proceed to Part 2.

Mandatory and Minimum Pass Mark Criteria (Applicant/Bidder's proposal must address)
Question	Evaluation Schema
1 a. Scope Describe your proposed solution and how it responds to the challenge. Include in your description the scientific and technological basis upon which your solution is proposed and clearly identify how your solution meets all of the EssentialOutcomes (if identified) in the Desired Outcomes and Considerations section in the Challenge Notice.	Mandatory - Pass/Fail Pass The Applicant/Bidder's proposed solution is clearly articulated, within the scope for the challenge and addresses all Essential Outcomes (if identified) in the Challenge Notice. Fail There is little or no evidence that the proposed solution is likely to meet the challenge. OR The proposed solution is articulated as out of scope for the challenge. OR The proposed solution does not address all Essential Outcomes listed in the challenge. OR The proposed solution is poorly described and does not permit concrete analysis.
2. Current Technology Readiness Level (TRL) Indicate the current TRL of your proposed solution. (Drop Down Menu of the Application/Bid Submission Form) Describe the research and development activities that have taken place to bring the proposed solution to the stated TRL.	Mandatory - Pass/Fail Pass: The Applicant/Bidder has demonstrated that the proposed solution is currently between TRLs 1 and 4 (inclusive), and provided justification by explaining the research and development (R&D) that has taken place to bring the solution to the stated TRL. Fail: The Applicant/Bidder has not provided sufficient evidence to demonstrate that the current TRL is between 1 to 4 (inclusive) including: There is insufficient/no evidence provided for TRL judgment. The solution involves the development of basic or fundamental research. The solution is at TRL 5 or higher. Insufficient/unclear/no justification explaining the R&D that took place to bring the solution to the stated TRL. The explanation simply paraphrases the description of a given TRL level.
3. Innovation Describe the novelty of your solution and how it advances the state-of-the-art over existing technologies, including competing solutions.	Point Rated with Minimum Pass Mark The minimum pass mark for this criteria is 4 points. 0 points/Fail: The Applicant/Bidder has not demonstrated that the proposed solution advances the state-of-the-art over existing technologies, including available competing solutions; OR The stated advancements are described in general terms but are not substantiated with specific, measurable evidence. 4 points: The Applicant/Bidder has demonstrated that the proposed solution offers one or two minor improvements to existing technologies, including available competing solutions, that have potential to create competitive advantages in existing market niches. 6 points: The Applicant/Bidder has demonstrated that the proposed solution offers three or more minor improvements to existing technologies, including available competing solutions, that together are likely to create competitive advantages in existing market niches; OR The Applicant/Bidder has demonstrated that the proposed solution offers one significant improvement to existing technologies that is likely to create competitive advantages in existing market niches 8 points: The Applicant/Bidder has demonstrated that the proposed solution offers two or more significant improvements to existing technologies, including available competing solutions that are likely to create competitive advantages in existing market niches and could define new market spaces; OR The Applicant/Bidder has demonstrated that the proposed solution can be considered a new benchmark of state of the art that is clearly ahead of competitors and that is likely to define new market spaces

Part 2: Point-Rated Criteria

Proposals that do not achieve the overall minimum score of at least 55 points out of a possible 110 points (50%) will be declared non-responsive and given no further consideration.

The overall minimum score is determined by adding the Applicant/Bidder's scores from the following questions together (1b, 3, 4-13).

Point-Rated Criteria (Applicant/Bidder's proposal to address)
Question	Evaluation Schema
1b. Scope Describe how your proposed solution addresses the Additional Outcomes (if identified) in the Desired Outcomes and Considerations section in the Challenge Notice. If no Additional Outcomes are identified in the Challenge Notice, Bidders/Applicants will receive 10 points	Insufficient or no information provided to demonstrate that the solution will address any of the Additional Outcomes. 0 points Information provided clearly demonstrates that the solution will address some (<50%) of the Additional Outcomes. 5 points Information provided clearly demonstrates that the solution will address most (50% or more) of the Additional Outcomes. 8 points Information provided clearly demonstrates that the solution will address all (100%) of the Additional Outcomes. 10 points
4. Phase 1 Science and Technology Risks Identify potential scientific and/or technological risks to the successful development of the proof of concept and how they will be mitigated in Phase 1?	Insufficient or no information provided to demonstrate that the Applicant/Bidder has considered potential risks and mitigation strategies and/or information provided contains significant gaps. 0 points Information provided demonstrates that the Applicant/Bidder has considered some potential risks and associated mitigation strategies but there are minor gaps in risks and/or associated mitigation strategies. 5 points Information provided clearly demonstrates that the Applicant/Bidder has sufficiently considered the risks and defined associated mitigation strategies. 10 points
5. Benefits to Canada Describe the benefits that could result from the successful development of your solution. Applicants/Bidders should consider the potential benefits using the following three categories: Innovation Benefits: Expected contribution towards the enhancement or development of new industrial or technological innovations. Assessment factors could include: potential spillover benefits, creation of intellectual property, impact on productivity of the new technology, etc. Economic Benefits: Forecasted impact on the growth of Canadian firms, clusters and supply chains, as well as its expected benefits for Canada's workforce. Assessment factors could include: number of jobs created, number of high-paying jobs, project-related revenue growth, etc. Public Benefits: Expected contribution to the broader public, including inclusive business and hiring practices (e.g., gender balance), investment in skills and training and environmental best practices. Assessment would consider the degree to which the Applicant/Bidder demonstrates that the solution is expected to generate social, environmental, health, security or other benefits to Canada. Assessment factors could include: solution-related environmental benefits, investment in local communities and solution-related impact on Indigenous communities.	Innovation Benefits Benefit not identified or insufficient claim of benefit. 0 points Benefit has marginal increment or limited justification. 1.5 points Benefit is significant and well justified. 3 points Economic Benefits Benefit not identified or insufficient claim of benefit. 0 points Benefit has marginal increment or limited justification. 1.5 points Benefit is significant and well justified. 3 points Public Benefits. Benefit not identified or insufficient claim of benefit. 0 points Benefit has marginal increment or limited justification. 1.5 points Benefit is significant and well justified. 3 points
6. Phase 1 Project Plan Demonstrate a feasible Phase 1 project plan by completing the table. Include: Project milestones; project activities under each milestone; time required to complete each milestone (e.g., days, weeks and/or months); (Indicate if any milestones and activities will be completed concurrently) total time required to complete the project; and key success criteria. Note: Phase 1 cannot exceed 6 months and TRL 4.	Insufficient or no information provided to demonstrate a feasible project plan for Phase 1 and/or the project plan exceeds the maximum duration indicated in the Challenge Notice. 0 points Project plan for Phase 1 is conceivably feasible but not clearly demonstrated and/or includes gaps. 5 points Information provided clearly demonstrates a feasible project plan for Phase 1. 10 points
7. Phase 1 Project Risks Identify potential project risks (eg. Human resources, financial, project management, etc) to the successful development of the proof of concept and how they will be mitigated?	Insufficient or no information provided to demonstrate that the Applicant/Bidder has considered potential risks and mitigation strategies and/or information provided contains significant gaps. 0 points Information provided demonstrates that the Applicant/Bidder has considered some potential risks and associated mitigation strategies but there are minor gaps in risks and/or associated mitigation strategies. 5 points Information provided clearly demonstrates that the Applicant/Bidder has sufficiently considered the risks and defined associated mitigation strategies. 10 points
8. Phase 1 Implementation Team Demonstrate how your project implementation team has the required management and technological skill sets and experience to deliver the project plan for Phase 1 by completing the table. A member of the implementation team can have more than one role. Include the labour rates and level of effort for each member. A day is defined as 7.5 hours of work, exclusive of meal breaks. The labour rates and level of effort will be reviewed as part of the evaluation for Question 10.	Insufficient or no information provided to demonstrate that the project team has the required management and technological skill sets and experience to deliver the Phase 1 project plan. 0 points Information is provided but there are minor gaps in required management and/or technological skill sets and/or experience to deliver the Phase 1 project plan. 5 points Information provided clearly demonstrates that the project team has the required management and technological skill sets and experience to deliver the Phase 1 project plan. 10 points
9. Inclusivity If your business were to receive funding from Innovative Solutions Canada, describe what actions (e.g., recruitment strategy, internships, co-op placements, etc.) might be taken in Phase 1 to support the participation of under-represented groups (e.g., women, youth, persons with disabilities, Indigenous people, visible minorities) in the research and development of the proposed solution.	No description and/or concrete examples of actions provided that would be taken to encourage greater participation of under-represented groups. 0 points A description and concrete examples of actions to encourage greater participation of under-represented groups provided. 3 points
10. Phase 1 Financial Proposal Demonstrate a realistic financial proposal for the Phase 1 project plan by completing the table.	Insufficient information provided and/or information provided significantly lack credibility. Does not demonstrate a realistic financial proposal for the Phase 1 project plan. 0 points Information is provided but some costs appear to be either over or under estimated for the Phase 1 project plan. 5 points Information provided contains credible elements to clearly demonstrate a realistic financial proposal for the Phase 1 project plan. 10 points
11. Phase 1 Financial Controls, Tracking and Oversight Describe the financial controls, tracking and oversight that will be used to manage the public funds throughout Phase 1.	Insufficient or no information provided to demonstrate the Applicant/Bidder's ability to manage public funds in Phase 1. 0 points Information provided is vague and/or contains gaps. The Applicant/Bidder has some controls, tracking and/or oversight in place to manage the public funds in Phase 1. 5 points Information provided clearly demonstrates that the Applicant/Bidder has strong financial controls, tracking and oversight to manage public funds in Phase 1. 10 points
12. Phase 2 Strategy Describe a realistic strategy for the prototype development if selected to participate in Phase 2. Responses should include: anticipated barriers key tasks estimated cost	Insufficient or no information provided to demonstrate that the Applicant/Bidder has contemplated a realistic strategy for the Phase 2 prototype development. 0 points Information provided demonstrates a conceivably realistic strategy for Phase 2 prototype development, however there are gaps and/or the strategy is vague. 5 points Information provided demonstrates that the Applicant/Bidder has a clear and realistic strategy. 10 points
13. Commercialization Approach Describe your overall commercialization approach for the proposed solution. Responses should include: Target markets (excluding Government of Canada) Non-ISC funding sources Transition to a commercially-ready product or service Any other indicators of commercial potential and commercial feasibility	Insufficient or no information provided to demonstrate that the proposed solution has commercial potential. 0 points Some information provided to demonstrate that the proposed solution has commercial potential, however there are gaps in the commercialization approach. 5 points A realistic commercialization approach is provided that demonstrates that the proposed solution has commercial potential. 10 points

Questions and answers

All incoming questions regarding a specific challenge will be posted here with the corresponding response.

If you have a question about a challenge, please send it to ISED-ISDE@canada.ca.

You can also consult the Frequently asked questions about the Innovative Solutions Canada Program.

A glossary is also available.

Language selection

WxT Search form

Plastics Challenge: Food Packaging

Challenge

Problem statement (bolded text updated on November 29, 2018)

Desired outcomes and considerations (bolded text updated on November 29, 2018)

Essential outcomes

Additional outcomes

Background and context

Maximum value and travel

Maximum grant value

Travel

Kick-off meeting

Progress Review Meeting

Final Review Meeting

Eligibility

Application guide

Evaluation Criteria

Part 1: Mandatory and Minimum Pass Mark Criteria

Part 2: Point-Rated Criteria

Questions and answers